0
0
Watch list
was added to the project list.
×

LED recessed wall luminaires made of cast bronze

Shielded light


Recessed wall luminaires for the glare-free illumination of surfaces from a low mounting height. Glare-free luminaires that make important orientation points visible from a low mounting height when it is dark or when the degree of illuminance is too low. They are also suitable for marking danger points.

Safety glass with light-directing texture distributes the light onto the surface to be illuminated. The glass is outside the visible area and is thus protected from damage.

Share

Protection class  IP 65

Cast bronze and stainless steel
Safety glass

24 082  for 24 V DC · without power supply unit · Safety class III
24 084  DALI controllable

When making the recessed opening in masonry or concrete walls, it is advisable to use an installation housing.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  Lamp A B C D AC/DC
24 082 K3   LED 2.8 W 70 lm 85 22 90 Ø 71
24 083 K3   LED 6.0 W 198 lm 150 30 100 Ø 130
24 084 K3   LED 10.2 W 539 lm 200 37 125 Ø 180

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more